Before considering the replacement of the starter motor, please carefully inspect the following aspects:

• Ensure that the battery is fully charged and in optimal condition.

• Double-check that the battery leads are correctly connected and free from any damage.

• Examine all electrical connections to ensure they are securely fitted and devoid of any corrosion. It is important to note that disconnecting the vehicle battery should be approached with caution.

 

2. Warning: Disconnecting the Vehicle Battery

 

Take heed of the following precautions when disconnecting the vehicle battery, as it may result in the loss of codes in certain vehicle systems. In such cases, the systems will need to be reprogrammed or the codes re-entered. Prior to disconnecting the battery, it is advisable to adhere to the recommended guidelines provided by the vehicle manufacturer.

 

3. Replacing the Starter Motor:

Follow these step-by-step instructions for the successful replacement of the starter motor:

• Begin by disconnecting the battery leads, starting with the negative lead followed by the positive lead.

• Take note of the cables connected to the starter motor and mark them according to their associated terminals.

• Carefully remove the cables connected to the starter motor.

• Proceed to remove the starter motor from the engine.

• Prior to installation, ensure that the new starter motor matches the specifications of the one you just removed. Compare details such as the number of teeth, flange design, electrical connections, rated voltage, and rotation direction.

• Before installing the starter motor, conduct a thorough inspection using the following criteria:

• The gear rim should be free from any damage or dirt. If heavily soiled, clean the flywheel housing accordingly.

• Both the surface of the starter motor flange and the flywheel housing must be clean and corrosion-free.

• Install the starter motor onto the engine and securely tighten the fixing bolts, following the instructions provided by the vehicle manufacturer.

• Connect the starter motor, ensuring each cable is correctly attached to its respective terminal. Take care to route the cables properly, ensuring they do not come into contact with hot or abrasive surfaces.

• Reconnect the battery leads to the battery, starting with the positive lead followed by the negative lead.

• Prior to starting the vehicle, verify that the battery is fully charged and that both the vehicle body and engine are properly grounded.

• Finally, start the engine to confirm that the starter motor is functioning correctly.

 

Popular Starter Motor

1. Starter Motor for Komatsu

Starter Motor YM121254-77011 YM121254-77012 YM121254-77010 for Komatsu 3D84 3D84N

Replace Part Number:
121254-77010, 121254-77011, 121254-77012, 12125477010, 12125477011,
12125477012, YM121254-77010, YM121254-77011, YM121254-77012, YM12125477010,
YM12125477011, YM12125477012

Specification:
Voltage (V): 12
Kilowatt (kW): 2.5
Teeth: 15

Fit for Komatsu Engine:
3D84-1A, 3D84-1B, 3D84-1D, 3D84-1FA, 3D84-1G, 3D84-1GA, 3D84-1GA-U,
3D84N-2C, 3D84N-2CA

Get your machinery revved up and ready to go with these high-performance starters. Don't let a sluggish motor slow you down - upgrade to the best in the business. Experience the power and reliability you deserve with our top-notch starter motors. Don't wait, get yours today!

 

2. Starter Motor for Perkins Engine

Starter Motor 2873K632 for Perkins Engine 1004-4 135Ti 1004G 1004-40T
1004-42 1104D-E44T 1104D-44T

Part Number: 2873K632

Perkins Engine: 1004-4, 1004-4T, 135Ti, 1004G, 1004-40T, 1004-40TW, 1004-42,
1104D-E44T, 1104D-E44TA, 1104D-44, 1104D-44T, 1104D-44TA, 1104C-44, 1104C-E44,
1104C-44T, 1104C-E44T, 1104C-44TA, 1104C-E44TA, 1006-6, 1006-6T, 1006-6TW, 1006-60, 1006-60TW

The Starter Motor 2873K632, the perfect companion for your Perkins Engine models including 1004-4, 135Ti, 1004G, 1004-40T, 1004-42, 1104D-E44T, and 1104D-44T. Get your engine roaring to life with this top-notch starter motor. Upgrade your Perkins Engine experience today!

 

3. Starter Motor for JLG Telehandler

12V 10T Starter Motor 70024311 70022640 for JLG Telehandler G12-55A G10-55A

Replace Part Number: 70024311, 70022640

Specification:
Voltage (V): 12
Number of Teeth: 10

Application:
Fit for JLG Telehandler: G12-55A, G10-55A

Get ready to rev up your telehandler with this powerful starter motor. With its 12V voltage and 10T design, it's built to deliver a reliable and efficient start every time. Compatible with JLG Telehandler models G12-55A and G10-55A, this starter motor is the perfect addition to keep your machine running smoothly. Don't let a sluggish start slow you down – upgrade to the 12V 10T Starter Motor for JLG Telehandler G12-55A G10-55A today!

 

4. Starter Motor for Caterpillar 

Starter Motor 138-7454 for Caterpillar CAT Engine 3003 3011C 3013C 3014
C1.1

Replace Part Number:
138-7454, 1387454, CA1387454, CA3408308, 340-8308, 3408308, CA20R3887,
20R-3887, 20R3887

Fit For Caterpillar CAT Engine: 3003, 3011C, 3013C, 3014, C1.1

Applications:
Fit For Caterpillar CAT Generator Set: DE9.5E3
Fit For Caterpillar CAT Vibratory Utility Compactor: CB1.7, CB1.8, CB14
Fit For Caterpillar CAT Mini Hydraulic Excavator: 301.7CR, 301.5, 302 CR

Get your engine roaring with this high-quality starter motor. Perfect for your Caterpillar CAT engine, it's built to provide reliable and efficient performance. Upgrade your engine today with the Starter Motor 138-7454!

 

FAB Heavy Parts  Can Help With Your Needs

Welcome to Fab Heavy Parts' online catalog, where you can explore a delightful array of starter motor.  We have a diverse selection to cater to your needs. Our knowledgeable parts team is at your disposal, ready to assist you every step of the way.